IBC containers with 1000 Litre capacity offered from time to time, normally on Trade Me. Our Vendor purchases new oil in these containers, so they do have lubricating oil residue .

These plants represent a complete dispersal of a South Island nursery. At this stage (18 August) we are seeking expressions of interest.

Alloy Deck - Body length - 4.9 metres, side height - 1100mm. Double swing taildoor, spreading chains, front access ladder, hungry board provision. Chassis width of 860mm. New buried front of body hoist. Buy Now $8000.00 + GST, but would sell separately:
Body $4000.00 + GST Hoist $4000.00 + GST

Two Axle Flat Top Semi Trailer -     Dommett 2009, 8.5 metres long, 10 stud axles, S-Cam brakes, Spring suspension, Steel chequer plate floor, One metre high removable headboard, full load landing legs

Portable laser receiving tower, homebuilt on trailer chassis. Wind-up tower. Ideal for land planing, etc, anywhere where height is a pre-requisite.

Offered on Trade Me

New Southland Beech timber flooring 1000 lineal metres - 140mm x 21mm. Kiln dried, ready to lay. Various lengths from 1.1m to 4.6m $10.50 / lineal metre South Wairarapa listing Bank deposit Pick up

NOW ON TRADE ME Listing 298870415

Tipulator with 2 1/2 year old body, 7.5 metres long with 1 metre high sides. This trailer has a brand new chassis and hoist, and has a double swing taildoor. 11R tyres, spoked rims, and brake coded. Rope hooks and full load landing legs. The tare is approx 6250kg .

This trailer has been rebuilt to a professional standard by our Principal, Adams & Currie, who have employed new construction techniques using box cross members providing increased strength . We have been engaged to further expose the excellent trailer to the marketplace

Ready to work and produce revenue!

Subject to prior sale (offered on Trade Me)

Various size tiles now surplus to requirements. Offered on Trade Me

Shiploader for sale. Originally designed to load woodchips. Sold for project that never eventuated. Broken down for transport by road and then delivered, but not reassembled.

As per the info attached to photograph

We have Clients who are currently searching for the following:

1. 6x4 tipper and tipping trailer combination

2. 3 Metre capacity loader around the Cat 936 size

3. 4x4 grader suitable for farm track work

Please advise if you have one of these assets scheduled for disposal.

H & H Mudloader 2406 Dredge Pump, 2,739 hours, 8” Discharge, has a fresh Cummins 290HP engine and an updated Wilder pumpGeneral: Fabricated Dredge Pump: Overall Length 27'9" (8.46m) Suction diameter 8" (203mm) Overall Width 8'4"(2.54m) Discharge diameter 8" (203mm) Hull Depth 3'0"(0.91m) Impeller diameter 18"(448mm) Height 9'0"(2.74m) Maximum particulate 4"(114.3mm) Mean draft with fuel 1'6" (0.46m) Fuel Capacity 95 gallons (359.6L) Dry Weight 13,000 lbs (9 tons) Operating Conditions: Dredge Pump Capacity: Dredging Depth: Water 3500 GPM Minimum 2'0" (0.61m) Heavy Sludge 2200 GPM Maximum 16'0" (4.88m) Sand 75 cubic yd/hr Max TDH 75-100 feet Propulsion: Cutter Drive: Windlass winch Direct Drive auger/tine cutterhead with a 7' Maximum 100'/min (30.48 m/min) horizontal cutting drum with a 26" outside 5/16 7x19 galvanized cable diameter Or Constant tensioning 3 or 4 winch systems Normal drive torque 15,750 in lbs (1754Nm) Maximum 40'/min (12.192 m/min) Cutterhead Speed 0-60 RPM 5/16 7x19 galvanized cable Power Unit: 6 cylinder water cooled diesel engine, outfitted with a residential grade silencer, rated for providing a minimum of 150 continuous HP at 1800 RPM. Engines can be Cummins, John Deere, or Deutz. This is a customer preference. Hydraulic System: Independent open-center circuits allow simultaneous pump, cutterhead, and traverse operation with variable speed controls. Hydraulic pump is a Commercial Intertech or equivalent with two stages, producing a hydraulic oil flow of 0-100 GPM. Each circuit is controlled via electro-hydraulic proportional valves. Each circuit has independent relief valves. System oil is cooled using a Thermal Transfer in-line oil cooler. All hoses and fittings are Parker Hannifin. Operator Compartment: Heated and cooled control cab with 360° visibility, and adjustable operator's chair with Electro-hydraulic joystick controls. Dredge systems readouts and alarms, operation gauges maintained in clear view.